Mac开发STC51单片机
二 23 九月 2025
STC官网 https://www.stcmcudata.com/ EdSim51模拟器 http://www.edsim51.com/ 要安装Java环境才能运行 image SDCC官网 https://sdcc.sourceforge.net/ SDCC简介 SDCC(Small Device C Compiler)是一款开源的C语言编译器,专门设计用于嵌入式系统和小型设备的开发。它支持多种架构和芯片,包括一些常见的单片机和微处理器,如8051、Z80、PIC等。
SDCC安装 brew install sdcc sdcc -v 头文件目录 cd /usr/local/share/sdcc/include/mcs51
include
include <8051.h>
include <8052.h>
include
include
include
include
include
编译命令
编译C代码,生成多个文件,包括main.ihx、main.hex
sdcc -mmcs51 --model-small -p89 main.c
-mmcs51: 指定目标平台为MCS-51系列,适用于8051单片机。
--model-small: 选择小型模型,适用于资源受限的设备,如STC89C51。
-p89: 指定目标芯片型号为STC89系列。
生成.hex文件
packihx main.ihx > main.hex 多个.c文件编译
用-c编译.c文件,生成.rel目标文件
sdcc -c tm1638.c
链接.rel目标文件,生成.ihx目标文件
sdcc main.c tm1638.rel
生成.hex文件
packihx main.ihx > main.hex 安装烧录工具 https://github.com/grigorig/stcgal https://github.com/grigorig/stcgal/blob/master/doc/zh_CN/USAGE.md 使用方法 usage: stcgal [-h] [-e] [-a] [-A {dtr,rts}] [-r RESETCMD] [-P {stc89,stc12a,stc12b,stc12,stc15a,stc15,stc8,stc8d,stc8g,usb15,auto}] [-p PORT] [-b BAUD] [-l HANDSHAKE] [-o OPTION] [-t TRIM] [-D] [-V] [code_image] [eeprom_image]
stcgal 1.7 - an STC MCU ISP flash tool (C) 2014-2018 Grigori Goronzy and others https://github.com/grigorig/stcgal
positional arguments: code_image code segment file to flash (BIN/HEX) //代码段文件刷新 eeprom_image eeprom segment file to flash (BIN/HEX) //EEPROM段文件刷新
optional arguments: -h, --help show this help message and exit //显示此帮助消息并退出 -a, --autoreset cycle power automatically by asserting DTR//断言DTR自动重启电源 -A {dtr,rts}, --resetpin {dtr,rts} pin to hold down when using --autoreset (default: DTR) -r RESETCMD, --resetcmd RESETCMD shell command for board power-cycling (instead of DTR //用于板上电重启的shell命令(而不是DTR断言) assertion) -P {stc89,stc12a,stc12b,stc12,stc15a,stc15,stc8,stc8d,stc8g,usb15,auto}, --protocol {stc89,stc12a,stc12b,stc12,stc15a,stc15,stc8,stc8d,stc8g,usb15,auto} protocol version (default: auto) //协议版本(芯片系列)(在默认状态为auto) -p PORT, --port PORT serial port device //串口设备 -b BAUD, --baud BAUD transfer baud rate (default: 115200) //传输波特率(默认值:115200) -l HANDSHAKE, --handshake HANDSHAKE handshake baud rate (default: 2400) //握手波特率(默认值:2400) -o OPTION, --option OPTION set option (can be used multiple times, see//设置选项(可以多次使用,请参阅文档) documentation) -t TRIM, --trim TRIM RC oscillator frequency in kHz (STC15+ series only)//RC振荡器频率(kHz)(仅STC15 +系列) -D, --debug enable debug output //启用调试输出 -V, --version print version info and exit //打印版本信息并退出 通讯协议与规定 auto 自动检测基于UART的协议(默认) stc89 STC89/90 系列 stc89a STC89/90 系列(BSL 7.2.5C) stc12a STC12x052 系列和其他类似系列 stc12b STC12x52 系列, STC12x56 系列和其他类似系列 stc12 多数 STC10/11/12 系列 stc15a STC15x104E 和 STC15x204E(A) 系列 stc15 多数 STC15 系列 stc8 STC8A8K64S4A12 和 STC8F 系列 stc8d 所有 STC8 和 STC32 系列 stc8g STC8G1 和 STC8H1 系列 usb15 支持USB的STC15W4系列 pip3 install stcgal
查看串口
ls /dev/tty.wchusbser*
烧录程序
stcgal -P stc89 -b 9600 -p /dev/tty.wchusbserial14330 main.hex make 编译烧录 main.c
include <8051.h>
void main(void) { for (;;) { P1--; } } Makefile 文件内容
SDCC编译器
CC = sdcc
SDCC链接器
LD = sdcc
编译选项,这里使用了-mmcs51 --model-small来指定目标为8051系列单片机的小模型
CFLAGS = -mmcs51 --model-small -p89
源文件的列表,这里只有一个main.c
SRC = main.c
目标文件的名称
TARGET = main IHX_FILE = $(TARGET).ihx HEX_FILE = $(TARGET).hex
是默认的目标,它依赖于$(HEX_FILE)
all: flash clean
目标用于烧录生成的Hex文件到STC89系列的单片机
flash: $(SRC) $(CC) $(CFLAGS) $(SRC) && packihx $(IHX_FILE) > $(HEX_FILE)
烧录程序
stcgal -p stc89 -P /dev/ttyUSB0 -b 9600 $(IHX_FILE)
stcgal -p stc89 -P /dev/ttyUSB0 -b 9600 $(HEX_FILE)
清理生成的中间文件
clean:
rm -f *.asm *.cdb *.rel *.rst *.map *.mem *.lk *.lst *.sym *.ihx *.hex
make all
模拟器运行效果
load文件.hex,然后run运行
image
常用命令
选择目标平台
-mmcs51: 适用于MCS-51系列单片机,如8051。
-mpic16: 适用于PIC16系列单片机。
指定芯片型号
-p
Category: 编程stc51